water-damage-restoration1

A preview on water damage restoration.

Water Damage Restoration is the process of repairing any house or property to its previous pre-loss condition. Damage to the property could be due to an overflow, a disaster such as a flood or any other water damage event. The water damage restoration process involves many several key procedures like water contamination levels and decontaminating and drying the structure. Mainly, there are two large certifying bodies, the RIA (Restoration Industry Association) and the IICRC (Institute of Inspection, Cleaning, and Restoration Certification) that recommends standards and precautions for water damage restoration. Most important standards for water damage restoration include:

  • Dealing with Categorization and Assessment

Loss evaluation is the first and the at most important step in water damage restoration. The assessment has to be correct so that an appropriate response can be taken. The damage caused by water should be managed by technicians and other insurance companies to understand what is damaged and what could be done in restoring the damage. Identifying the primary source of the damage is also important. Proper documentation of harm should be maintained, and accurate estimates should also be reported. Categorization should be based on the contamination levels of the water source. The categories include cleaning the water sources like pipes, toilets, and sinks. Contaminated water in dishwasher or washing machine should be disposed of and kept clean. Sewage water and water from the toilet with feces or any standing water with microbial growth and floodwater should be flushed. Check here.

images

  • Decontamination and Drying

Once the evaluation is complete, the process of drying and decontaminating should. This should be based on the extent of damage or damage caused due to water. This can be classified into four types. Class 1 damage is restricted to a small area where less water has been absorbed by materials. Type 2 damage is extended to the entire room and carpet area. Class 3 loss is when the whole area is saturated with water and Class 4 damage when the water has done extensive damage. Decontamination and drying is an essential stage in which equipment like blowers, scrubbers, dehumidifiers and subfloor drying equipment are used. Decontamination has to be done if contamination has been detected in the area. Visit this site for more information : http://a1emergencyservice.com/

  • Monitoring and Completion

Monitoring the restoration process of damage is critical to achieving the desired results. One has to be proactive and aware during the monitoring process. A check should be maintained on drying equipment whether they have been setup properly. It is important to assess if the personnel that were involved are qualified for the job and check if the equipment is in perfect working order, and all part of the monitoring process are active. Necessary steps should be taken if anything wrong could be spotted before the control process. The process of water damage restoration would be classified as complete only once the temperature, humidity, and the moisture content are as per standards. Upon completion of the water damage restoration process, the drying equipment can be removed, as desired.

 

Write a Reply or Comment

Your email address will not be published. Required fields are marked *


Social Widgets powered by AB-WebLog.com.